Steuerkettenwechsel 3.9 V6 Magnum

Dodge-Forum

Help Support Dodge-Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

schwede133

QuadCab
Registriert
25. Dez. 2010
Beiträge
566
Reaktionspunkte
0
Ort
Drochtersen
Hallo,

hat jemand eine ausführliche Anleitung für den Steuerkettenwechsel an einem 3.9 V6 Magnum?
Oder kann mir jemand einen Tipp geben, wer mir im Raum Hamburg die Kette günstig wechseln könnte.

Vielen Dank und viele Grüße

Matthias
 
Im Prinzip ganz einfach:

Ich kopiere hier mal die Documentation von chrysler rein


TIMING BELT/CHAIN AND
SPROCKETS
REMOVAL
(1) Disconnect battery negative cable.
(2) Drain cooling system (Refer to 7 - COOLING -
STANDARD PROCEDURE).
(3) Remove timing chain cover (Refer to 9 -
ENGINE/VALVE TIMING/TIMING BELT / CHAIN
COVER(S) - REMOVAL).
(4) Rotate crankshaft to align timing marks (Fig.
84) to #1 TDC.
(5) Remove camshaft sprocket attaching bolt and
remove timing chain with crankshaft and camshaft
sprockets.
(6) Slip crankshaft sprocket onto crankshaft and
compress tensioner shoe by placing a large screwdriver
between crankshaft sprocket and tensioner
shoe (Fig. 83). Compress shoe until hole in shoe lines
up with hole in bracket. Slide a suitable pin into the
holes (Fig. 83) and remove screwdriver.
(7) If tensioner assembly is to be replaced, remove
the three tensioner to block bolts and remove tensioner
assembly.
INSPECTION
 
Rein Interessehalber, kann das jemand übersetzen?
:-D
 
Oben